The New Holland TV145 tractor hydraulic capacity is 10.5 gal | 39.7 L, pump flow is 30 gpm | 113.6 lpm, and hydraulic type is closed center load sensing.
New Holland TV145 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Hydraulic capacity | 10.5 gal | 39.7 L |
| Pump flow | 30 gpm | 113.6 lpm |
New Holland TV145 Hitch, Remote & Lift Specs
| Rear hitch type | 2 |
|---|---|
| Rear lift | 8,700 lbs | 3946 kg |
| Front lift | 4,000 lbs | 1814 kg |
New Holland TV145 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 2.9 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.3 minutes at rated pump flow |
| Rear lift per pump gpm | 290 lb per gpm |
| Rear lift per hydraulic gallon | 828.6 lb per gal |
| Metric capacity vs pump flow | 39.7 L capacity with 30 gpm pump flow |
New Holland TV145 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TV145 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Hydraulic wet disc brakes |
New Holland TV145 Hydraulic Capacity FAQ
Is the New Holland TV145 hydraulic capacity big or small for its size?
The New Holland TV145 lists 10.5 gal | 39.7 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland TV145 hydraulics feel fast or slow?
The useful speed clue is 30 gpm | 113.6 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the New Holland TV145?
On the New Holland TV145, 30 gpm | 113.6 lpm pump flow points to quicker loader and cylinder movement and 8,700 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TV145?
For implement matching, the useful checks are 30 gpm flow, 8,700 lb listed lift, and 2 hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, better suited to heavier mounted implements, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TV145 rear lift capacity strong?
The listed lift figure is 8,700 lbs | 3946 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the New Holland TV145 hydraulics handle long hydraulic jobs?
The useful heat clues are 10.5 gal of hydraulic capacity and 30 gpm flow. That is a high flow-to-oil-volume ratio, so heat and oil condition matter more during constant hydraulic work.
What do the New Holland TV145 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2 and listed lift is 8,700 lbs | 3946 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland TV145 use?
The hydraulic system is listed as closed center load sensing with 30 gpm | 113.6 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TV145 hydraulics?
For service planning, the oil-volume figure is 10.5 gal | 39.7 L, the system is listed as closed center load sensing, and flow is listed at 30 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
