The New Holland TV140 tractor hydraulic capacity is 13.5 gal | 51.1 L, pump flow is 30 gpm | 113.6 lpm, and hydraulic pressure is 3000 psi | 206.8 bar.
Hydraulic Capacity13.5 gal | 51.1 L
Hydraulic Flow30 gpm | 113.6 lpm
Pressure3000 psi | 206.8 bar
Hydraulic Typeclosed center load sensing
Lift Capacity6500 lbs | 2948 kg
New Holland TV140 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load sensing
Hydraulic capacity
13.5 gal | 51.1 L
Hydraulic pressure
3000 psi | 206.8 bar
Pump flow
30 gpm | 113.6 lpm
New Holland TV140 Hitch, Remote & Lift Specs
Rear hitch type
II
Rear lift at 24 inches
6500 lbs | 2948 kg
New Holland TV140 Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
2.2 gpm per gal
Hydraulic tank turnover estimate
about 0.5 minutes at rated pump flow
Rear lift per pump gpm
216.7 lb per gpm
Rear lift per hydraulic gallon
481.5 lb per gal
Estimated hydraulic horsepower
about 52.5 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
51.1 L capacity with 30 gpm pump flow
New Holland TV140 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
13.5 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
30 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
3,000 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
6,500 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TV140 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic articulated
Brakes
Hydraulic wet disc brakes
New Holland TV140 Hydraulic Capacity FAQ
Is the New Holland TV140 hydraulic capacity big or small for its size?
The New Holland TV140 lists 13.5 gal | 51.1 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland TV140 hydraulics feel fast or slow?
The useful speed clue is 30 gpm | 113.6 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland TV140 hydraulic pressure tell you?
The pressure spec is 3000 psi | 206.8 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the New Holland TV140?
On the New Holland TV140, 30 gpm | 113.6 lpm pump flow points to quicker loader and cylinder movement, 3,000 psi pressure affects force more than speed, and 6,500 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TV140?
For implement matching, the useful checks are 30 gpm flow, 3,000 psi pressure, 6,500 lb listed lift, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, strong on hydraulic force if the cylinders and relief settings match, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TV140 rear lift capacity strong?
The listed lift figure is 6500 lbs | 2948 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Will the New Holland TV140 hydraulics handle long hydraulic jobs?
The useful heat clues are 13.5 gal of hydraulic capacity, 30 gpm flow, 3,000 psi pressure, and about 52.5 hydraulic hp by the pressure-flow estimate. That is a high flow-to-oil-volume ratio, so heat and oil condition matter more during constant hydraulic work.
How much hydraulic power does the New Holland TV140 make on paper?
Using 3,000 psi and 30 gpm, the rough pressure-flow estimate is about 52.5 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TV140 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 6500 lbs | 2948 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland TV140 use?
The hydraulic system is listed as closed center load sensing with 30 gpm | 113.6 lpm pump flow and 3000 psi | 206.8 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
