The New Holland TJ325 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 40 gpm | 151.4 lpm, hydraulic type is closed center load sensing, and valves/remotes are listed as 4 to 7.
New Holland TJ325 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Total hydraulic flow | 40 gpm | 151.4 lpm |
| SCV flow | 35 gpm | 132.5 lpm |
| Rear remotes | 4 to 7 |
New Holland TJ325 Hitch, Remote & Lift Specs
| Rear hitch type | IVN/III |
|---|---|
| Rear lift at 24 inches | 14500 lbs | 6577 kg |
New Holland TJ325 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TJ325 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | hydraulic wet disc brakes |
New Holland TJ325 Hydraulic Capacity FAQ
Why is the New Holland TJ325 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TJ325, but total hydraulic flow is 40 gpm | 151.4 lpm, system type is closed center load sensing, and lift is listed as 14500 lbs | 6577 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TJ325 hydraulics feel fast or slow?
The useful speed clue is 40 gpm | 151.4 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland TJ325?
On the New Holland TJ325, 40 gpm | 151.4 lpm total hydraulic flow points to slower loader and cylinder movement and 14,500 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TJ325?
For implement matching, the useful checks are 40 gpm flow, 14,500 lb listed lift, 4 to 7 remote/valve listing, and IVN/III hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TJ325 rear lift capacity strong?
The listed lift figure is 14500 lbs | 6577 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland TJ325 hydraulic remotes enough?
The New Holland TJ325 remote/valve listing is 4 to 7. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TJ325 hydraulics handle long hydraulic jobs?
The useful heat clues are 40 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland TJ325 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN/III and listed lift is 14500 lbs | 6577 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland TJ325 use?
The hydraulic system is listed as closed center load sensing with 40 gpm | 151.4 lpm total hydraulic flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland TJ325 hydraulics?
For service planning, the system is listed as closed center load sensing and flow is listed at 40 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
