The New Holland TJ280 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 33 gpm | 124.9 lpm, hydraulic pressure is 2000 psi | 137.9 bar, and hydraulic type is closed center load sensing (CCLS).
about 38.5 hydraulic hp from listed pressure and pump flow
New Holland TJ280 Hydraulic Comparison Charts
Pump flow comparison
This model
33 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,000 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
15,669 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland TJ280 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
hydraulic wet disc brakes
New Holland TJ280 Extra Hydraulic Notes
Total flow
40 gpm | 151.4 lpm
New Holland TJ280 Hydraulic Capacity FAQ
Why is the New Holland TJ280 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland TJ280, but pump flow is 33 gpm | 124.9 lpm, pressure is 2000 psi | 137.9 bar, system type is closed center load sensing (CCLS), and lift is listed as 15,669 lbs | 7107 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland TJ280 hydraulics feel fast or slow?
The useful speed clue is 33 gpm | 124.9 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland TJ280 hydraulic pressure tell you?
The pressure spec is 2000 psi | 137.9 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland TJ280?
On the New Holland TJ280, 33 gpm | 124.9 lpm pump flow points to slower loader and cylinder movement, 2,000 psi pressure affects force more than speed, and 15,669 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland TJ280?
For implement matching, the useful checks are 33 gpm flow, 2,000 psi pressure, 15,669 lb listed lift, and 4 to 9 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and not a brute-force hydraulic setup compared with higher-pressure systems, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland TJ280 rear lift capacity strong?
The listed lift figure is 15,669 lbs | 7107 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland TJ280 hydraulic remotes enough?
The New Holland TJ280 remote/valve listing is 4 to 9. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland TJ280 hydraulics handle long hydraulic jobs?
The useful heat clues are 33 gpm flow, 2,000 psi pressure, and about 38.5 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland TJ280 make on paper?
Using 2,000 psi and 33 gpm, the rough pressure-flow estimate is about 38.5 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland TJ280 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN/III (Optional) and listed lift is 15,669 lbs | 7107 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
