The New Holland T6040 Elite tractor hydraulic capacity is 16.3 gal | 61.7 L, pump flow is 26.5 gpm | 100.3 lpm, and hydraulic type is closed center load sensing.
Hydraulic Capacity16.3 gal | 61.7 L
Hydraulic Flow26.5 gpm | 100.3 lpm
Hydraulic Typeclosed center load sensing
Valves / Remotes2 to 4
Lift Capacity12,185 lbs | 5527 kg
New Holland T6040 Elite Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load sensing
Hydraulic capacity
16.3 gal | 61.7 L
Pump flow
26.5 gpm | 100.3 lpm
Total hydraulic flow
37 gpm | 140.0 lpm
Steering flow
10.5 gpm | 39.7 lpm
Hydraulic valves
2 to 4
New Holland T6040 Elite Hitch, Remote & Lift Specs
Rear hitch type
2/3N
Rear hitch control
electronic lower-link draft control
Rear lift
12,185 lbs | 5527 kg
New Holland T6040 Elite Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.6 gpm per gal
Hydraulic tank turnover estimate
about 0.6 minutes at rated pump flow
Total flow vs pump flow
139.6% of listed pump flow
Steering flow vs pump flow
39.6% of listed pump flow
Rear lift per pump gpm
459.8 lb per gpm
Rear lift per hydraulic gallon
747.5 lb per gal
Metric capacity vs pump flow
61.7 L capacity with 26.5 gpm pump flow
New Holland T6040 Elite Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
16.3 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
26.5 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Rear lift comparison
This model
12,185 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T6040 Elite Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
hydraulic wet disc brakes
New Holland T6040 Elite Hydraulic Capacity FAQ
Is the New Holland T6040 Elite hydraulic capacity big or small for its size?
The New Holland T6040 Elite lists 16.3 gal | 61.7 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland T6040 Elite hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland T6040 Elite?
On the New Holland T6040 Elite, 26.5 gpm | 100.3 lpm pump flow points to slower loader and cylinder movement and 12,185 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T6040 Elite?
For implement matching, the useful checks are 26.5 gpm flow, 12,185 lb listed lift, 2 to 4 remote/valve listing, and 2/3N hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, best kept realistic on heavy rear implements, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T6040 Elite rear lift capacity strong?
The listed lift figure is 12,185 lbs | 5527 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland T6040 Elite hydraulic remotes enough?
The New Holland T6040 Elite remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T6040 Elite hydraulics handle long hydraulic jobs?
The useful heat clues are 16.3 gal of hydraulic capacity and 26.5 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the New Holland T6040 Elite hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/3N, hitch control is electronic lower-link draft control, and listed lift is 12,185 lbs | 5527 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T6040 Elite use?
The hydraulic system is listed as closed center load sensing with 26.5 gpm | 100.3 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T6040 Elite hydraulics?
For service planning, the oil-volume figure is 16.3 gal | 61.7 L, the system is listed as closed center load sensing, and flow is listed at 26.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
