The New Holland T8.360 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 35 gpm | 132.5 lpm, hydraulic type is closed center load sensing, and valves/remotes are listed as 4 to 6.
New Holland T8.360 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Pump flow | 35 gpm | 132.5 lpm |
| Total hydraulic flow | 42.5 gpm | 160.9 lpm |
| Rear remotes | 4 to 6 |
New Holland T8.360 Hitch, Remote & Lift Specs
| Rear hitch type | III/IIIN |
|---|---|
| Rear lift | 16375 lbs | 7427 kg |
New Holland T8.360 Useful Hydraulic Calculations
| Total flow vs pump flow | 121.4% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 467.9 lb per gpm |
New Holland T8.360 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T8.360 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
New Holland T8.360 Hydraulic Capacity FAQ
Why is the New Holland T8.360 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T8.360, but pump flow is 35 gpm | 132.5 lpm, system type is closed center load sensing, and lift is listed as 16375 lbs | 7427 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T8.360 hydraulics feel fast or slow?
The useful speed clue is 35 gpm | 132.5 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland T8.360?
On the New Holland T8.360, 35 gpm | 132.5 lpm pump flow points to slower loader and cylinder movement and 16,375 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T8.360?
For implement matching, the useful checks are 35 gpm flow, 16,375 lb listed lift, 4 to 6 remote/valve listing, and III/IIIN hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T8.360 rear lift capacity strong?
The listed lift figure is 16375 lbs | 7427 kg, close to the 15,500 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland T8.360 hydraulic remotes enough?
The New Holland T8.360 remote/valve listing is 4 to 6. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T8.360 hydraulics handle long hydraulic jobs?
The useful heat clues are 35 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland T8.360 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/IIIN and listed lift is 16375 lbs | 7427 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T8.360 use?
The hydraulic system is listed as closed center load sensing with 35 gpm | 132.5 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T8.360 hydraulics?
For service planning, the system is listed as closed center load sensing and flow is listed at 35 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
