The New Holland T7.315 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 43.5 gpm | 164.6 lpm, hydraulic type is closed center load-sensing, and valves/remotes are listed as 4 or 5.
New Holland T7.315 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load-sensing |
|---|---|
| Pump flow | 43.5 gpm | 164.6 lpm |
| Rear remotes | 4 or 5 |
New Holland T7.315 Hitch, Remote & Lift Specs
| Rear hitch type | III |
|---|---|
| Rear hitch control | electronic lower-link draft control |
| Rear lift at 24 inches | 19180 lbs | 8700 kg |
New Holland T7.315 Useful Hydraulic Calculations
| Rear lift per pump gpm | 440.9 lb per gpm |
|---|
New Holland T7.315 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T7.315 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
New Holland T7.315 Hydraulic Capacity FAQ
Why is the New Holland T7.315 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T7.315, but pump flow is 43.5 gpm | 164.6 lpm, system type is closed center load-sensing, and lift is listed as 19180 lbs | 8700 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T7.315 hydraulics feel fast or slow?
The useful speed clue is 43.5 gpm | 164.6 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland T7.315?
On the New Holland T7.315, 43.5 gpm | 164.6 lpm pump flow points to slower loader and cylinder movement and 19,180 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T7.315?
For implement matching, the useful checks are 43.5 gpm flow, 19,180 lb listed lift, 4 or 5 remote/valve listing, and III hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T7.315 rear lift capacity strong?
The listed lift figure is 19180 lbs | 8700 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland T7.315 hydraulic remotes enough?
The New Holland T7.315 remote/valve listing is 4 or 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T7.315 hydraulics handle long hydraulic jobs?
The useful heat clues are 43.5 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland T7.315 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III, hitch control is electronic lower-link draft control, and listed lift is 19180 lbs | 8700 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T7.315 use?
The hydraulic system is listed as closed center load-sensing with 43.5 gpm | 164.6 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T7.315 hydraulics?
For service planning, the system is listed as closed center load-sensing and flow is listed at 43.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
