The New Holland Boomer 4060 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 12 gpm | 45.4 lpm, hydraulic pressure is 2489 psi | 171.6 bar, and hydraulic type is open center.
Hydraulic Flow12 gpm | 45.4 lpm
Pressure2489 psi | 171.6 bar
Hydraulic Typeopen center
Lift Capacity3465 lbs | 1571 kg
New Holland Boomer 4060 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2489 psi | 171.6 bar
Pump flow
12 gpm | 45.4 lpm
Total hydraulic flow
16.9 gpm | 64.0 lpm
Steering flow
5.5 gpm | 20.8 lpm
New Holland Boomer 4060 Hitch, Remote & Lift Specs
Rear hitch type
II/I
Rear lift at ends
4355 lbs | 1975 kg
Rear lift at 24 inches
3465 lbs | 1571 kg
New Holland Boomer 4060 Useful Hydraulic Calculations
Total flow vs pump flow
140.8% of listed pump flow
Steering flow vs pump flow
45.8% of listed pump flow
Rear lift per pump gpm
288.8 lb per gpm
Estimated hydraulic horsepower
about 17.4 hydraulic hp from listed pressure and pump flow
New Holland Boomer 4060 Hydraulic Comparison Charts
Pump flow comparison
This model
12 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,489 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
3,465 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Boomer 4060 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Mechanical wet disc brakes
Differential lock
mechanical rear
New Holland Boomer 4060 Hydraulic Capacity FAQ
Why is the New Holland Boomer 4060 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Boomer 4060, but pump flow is 12 gpm | 45.4 lpm, pressure is 2489 psi | 171.6 bar, system type is open center, and lift is listed as 3465 lbs | 1571 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Boomer 4060 hydraulics feel fast or slow?
The useful speed clue is 12 gpm | 45.4 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the New Holland Boomer 4060 hydraulic pressure tell you?
The pressure spec is 2489 psi | 171.6 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland Boomer 4060?
On the New Holland Boomer 4060, 12 gpm | 45.4 lpm pump flow points to slower loader and cylinder movement, 2,489 psi pressure affects force more than speed, and 3,465 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Boomer 4060?
For implement matching, the useful checks are 12 gpm flow, 2,489 psi pressure, 3,465 lb listed lift, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Boomer 4060 rear lift capacity strong?
The listed lift figure is 3465 lbs | 1571 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the New Holland Boomer 4060 hydraulics handle long hydraulic jobs?
The useful heat clues are 12 gpm flow, 2,489 psi pressure, and about 17.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland Boomer 4060 make on paper?
Using 2,489 psi and 12 gpm, the rough pressure-flow estimate is about 17.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the New Holland Boomer 4060 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I and listed lift is 3465 lbs | 1571 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Boomer 4060 use?
The hydraulic system is listed as open center with 12 gpm | 45.4 lpm pump flow and 2489 psi | 171.6 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
