The New Holland 9482 tractor hydraulic capacity is 31 gal | 117.3 L, pump flow is 45 gpm | 170.3 lpm, and hydraulic pressure is 2250 psi | 155.1 bar.
New Holland 9482 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center load sensing |
|---|---|
| Hydraulic capacity | 31 gal | 117.3 L |
| Hydraulic pressure | 2250 psi | 155.1 bar |
| Pump flow | 45 gpm | 170.3 lpm |
| Steering flow | 27 gpm | 102.2 lpm |
| SCV flow | 30 gpm | 113.6 lpm |
| Hydraulic valves | 1 to 4 |
New Holland 9482 Hitch, Remote & Lift Specs
| Rear hitch type | IVN/3 Optional |
|---|---|
| Rear lift at 24 inches | 13000 lbs | 5896 kg |
New Holland 9482 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.5 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.7 minutes at rated pump flow |
| SCV flow vs pump flow | 66.7% of listed pump flow |
| Steering flow vs pump flow | 60% of listed pump flow |
| Rear lift per pump gpm | 288.9 lb per gpm |
| Rear lift per hydraulic gallon | 419.4 lb per gal |
| Estimated hydraulic horsepower | about 59.1 hydraulic hp from listed pressure and pump flow |
| Metric capacity vs pump flow | 117.3 L capacity with 45 gpm pump flow |
New Holland 9482 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 9482 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Hydraulic dry disc brakes |
New Holland 9482 Hydraulic Capacity FAQ
Is the New Holland 9482 hydraulic capacity big or small for its size?
The New Holland 9482 lists 31 gal | 117.3 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the New Holland 9482 hydraulics feel fast or slow?
The useful speed clue is 45 gpm | 170.3 lpm pump flow, close to the 50 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the New Holland 9482 hydraulic pressure tell you?
The pressure spec is 2250 psi | 155.1 bar, below the 3,100 psi benchmark. Pressure is the force side of hydraulics, so this matters more for lift and cylinder push than for speed.
What matters most for loader speed on the New Holland 9482?
On the New Holland 9482, 45 gpm | 170.3 lpm pump flow is around normal for loader/cylinder speed, 2,250 psi pressure affects force more than speed, and 13,000 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 9482?
For implement matching, the useful checks are 45 gpm flow, 2,250 psi pressure, 13,000 lb listed lift, and 1 to 4 remote/valve listing. That combination is in the normal flow range for this size group, not a brute-force hydraulic setup compared with higher-pressure systems, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 9482 rear lift capacity strong?
The listed lift figure is 13000 lbs | 5896 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the New Holland 9482 hydraulic remotes enough?
The New Holland 9482 remote/valve listing is 1 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland 9482 hydraulics handle long hydraulic jobs?
The useful heat clues are 31 gal of hydraulic capacity, 45 gpm flow, 2,250 psi pressure, and about 59.1 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the New Holland 9482 make on paper?
Using 2,250 psi and 45 gpm, the rough pressure-flow estimate is about 59.1 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland 9482 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IVN/3 Optional and listed lift is 13000 lbs | 5896 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
