The New Holland 1215 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 3.9 gpm | 14.8 lpm, and hydraulic type is open center.
Hydraulic Flow3.9 gpm | 14.8 lpm
Hydraulic Typeopen center
Lift Capacity1265 lbs | 573 kg
New Holland 1215 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
3.9 gpm | 14.8 lpm
New Holland 1215 Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at ends
1474 lbs | 668 kg
Rear lift at 24 inches
1265 lbs | 573 kg
New Holland 1215 Useful Hydraulic Calculations
Rear lift per pump gpm
324.4 lb per gpm
New Holland 1215 Hydraulic Comparison Charts
Pump flow comparison
This model
3.9 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
1,265 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland 1215 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Manual steering
Brakes
Wet disc brakes
New Holland 1215 Hydraulic Capacity FAQ
Why is the New Holland 1215 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland 1215, but pump flow is 3.9 gpm | 14.8 lpm, system type is open center, and lift is listed as 1265 lbs | 573 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland 1215 hydraulics feel fast or slow?
The useful speed clue is 3.9 gpm | 14.8 lpm pump flow, below the 8 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland 1215?
On the New Holland 1215, 3.9 gpm | 14.8 lpm pump flow points to slower loader and cylinder movement and 1,265 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland 1215?
For implement matching, the useful checks are 3.9 gpm flow, 1,265 lb listed lift, and I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland 1215 rear lift capacity strong?
The listed lift figure is 1265 lbs | 573 kg, below the 1,800 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the New Holland 1215 hydraulics handle long hydraulic jobs?
The useful heat clues are 3.9 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland 1215 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 1265 lbs | 573 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland 1215 use?
The hydraulic system is listed as open center with 3.9 gpm | 14.8 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland 1215 hydraulics?
For service planning, the system is listed as open center and flow is listed at 3.9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
