The Massey Ferguson 7719 tractor hydraulic capacity is 26.4 gal | 99.9 L, pump flow is 29 gpm | 109.8 lpm, and hydraulic pressure is 2900 psi | 200.0 bar.
Hydraulic Capacity26.4 gal | 99.9 L
Hydraulic Flow29 gpm | 109.8 lpm
Pressure2900 psi | 200.0 bar
Hydraulic Typeclosed center load sensing
Valves / Remotes3 to 5
Lift Capacity13500 lbs * With Dyna-6 transmission 6123 kg
about 49.1 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
99.9 L capacity with 29 gpm pump flow
Massey Ferguson 7719 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
26.4 gal
Average
42 gal
Low
22 gal
High
80 gal
Pump flow comparison
This model
29 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,900 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Rear lift comparison
This model
13,500 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 7719 hydraulic capacity big or small for its size?
The Massey Ferguson 7719 lists 26.4 gal | 99.9 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 7719 hydraulics feel fast or slow?
The useful speed clue is 29 gpm | 109.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 7719 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 7719?
On the Massey Ferguson 7719, 29 gpm | 109.8 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 13,500 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 7719?
For implement matching, the useful checks are 29 gpm flow, 2,900 psi pressure, 13,500 lb listed lift, and 3 to 5 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 7719 rear lift capacity strong?
The listed lift figure is 13500 lbs * With Dyna-6 transmission 6123 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 7719 hydraulic remotes enough?
The Massey Ferguson 7719 remote/valve listing is 3 to 5. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 7719 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.4 gal of hydraulic capacity, 29 gpm flow, 2,900 psi pressure, and about 49.1 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 7719 make on paper?
Using 2,900 psi and 29 gpm, the rough pressure-flow estimate is about 49.1 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 7719 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III, hitch control is electronic lower-link draft sensing, and listed lift is 13500 lbs * With Dyna-6 transmission 6123 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
