The Massey Ferguson 7718S tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 29 gpm | 109.8 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is closed-center load-sensing.
about 49.1 hydraulic hp from listed pressure and pump flow
Massey Ferguson 7718S Hydraulic Comparison Charts
Pump flow comparison
This model
29 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Hydraulic pressure comparison
This model
2,900 psi
Average
3,100 psi
Low
2,600 psi
High
3,700 psi
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 7718S hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 7718S, but pump flow is 29 gpm | 109.8 lpm, pressure is 2900 psi | 200.0 bar, and system type is closed-center load-sensing. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 7718S hydraulics feel fast or slow?
The useful speed clue is 29 gpm | 109.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 7718S hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 7718S?
On the Massey Ferguson 7718S, 29 gpm | 109.8 lpm pump flow points to slower loader and cylinder movement and 2,900 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 7718S?
For implement matching, the useful checks are 29 gpm flow, 2,900 psi pressure, 2 or 3 remote/valve listing, and III/II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the Massey Ferguson 7718S hydraulic remotes enough?
The Massey Ferguson 7718S remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 7718S hydraulics handle long hydraulic jobs?
The useful heat clues are 29 gpm flow, 2,900 psi pressure, and about 49.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 7718S make on paper?
Using 2,900 psi and 29 gpm, the rough pressure-flow estimate is about 49.1 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 7718S hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/II and hitch control is electronic draft control. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 7718S use?
The hydraulic system is listed as closed-center load-sensing with 29 gpm | 109.8 lpm pump flow and 2900 psi | 200.0 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
