The Massey Ferguson 6614 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15 gpm | 56.8 lpm, hydraulic type is open center | open center Twin Flow open center (Optional), and valves/remotes are listed as up to 4.
Hydraulic Flow15 gpm | 56.8 lpm
Hydraulic Typeopen center | open center Twin Flow open center (Optional)
open center | open center Twin Flow open center (Optional)
SCV flow
15 gpm | 56.8 lpm
Hydraulic valves
up to 4
Massey Ferguson 6614 Hitch, Remote & Lift Specs
Rear hitch type
III
Rear hitch control
electronic draft control
Rear lift at 24 inches
11400 lbs | 5171 kg
Front lift
7050 lbs | 3197 kg
Drawbar category
Cat. 2
Massey Ferguson 6614 Hydraulic Comparison Charts
Pump flow comparison
This model
15 gpm
Average
50 gpm
Low
25 gpm
High
90 gpm
Rear lift comparison
This model
11,400 lb
Average
15,500 lb
Low
9,000 lb
High
26,000 lb
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 6614 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 6614, but SCV flow is 15 gpm | 56.8 lpm, system type is open center | open center Twin Flow open center (Optional), and lift is listed as 11400 lbs | 5171 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 6614 hydraulics feel fast or slow?
The useful speed clue is 15 gpm | 56.8 lpm SCV flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson 6614?
On the Massey Ferguson 6614, 15 gpm | 56.8 lpm SCV flow points to slower loader and cylinder movement and 11,400 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 6614?
For implement matching, the useful checks are 15 gpm flow, 11,400 lb listed lift, up to 4 remote/valve listing, and III hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 6614 rear lift capacity strong?
The listed lift figure is 11400 lbs | 5171 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 6614 hydraulic remotes enough?
The Massey Ferguson 6614 remote/valve listing is up to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 6614 hydraulics handle long hydraulic jobs?
The useful heat clues are 15 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Massey Ferguson 6614 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III, hitch control is electronic draft control, and listed lift is 11400 lbs | 5171 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 6614 use?
The hydraulic system is listed as open center | open center Twin Flow open center (Optional) with 15 gpm | 56.8 lpm SCV flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 6614 hydraulics?
For service planning, the system is listed as open center | open center Twin Flow open center (Optional) and flow is listed at 15 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
