The Massey Ferguson 5470SA tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26 gpm | 98.4 lpm, hydraulic pressure is 3050 psi | 210.3 bar, and hydraulic type is open center.
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 5470SA hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 5470SA, but total hydraulic flow is 26 gpm | 98.4 lpm, pressure is 3050 psi | 210.3 bar, system type is open center, and lift is listed as 6600 lbs | 2993 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 5470SA hydraulics feel fast or slow?
The useful speed clue is 26 gpm | 98.4 lpm total hydraulic flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Massey Ferguson 5470SA hydraulic pressure tell you?
The pressure spec is 3050 psi | 210.3 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Massey Ferguson 5470SA?
On the Massey Ferguson 5470SA, 26 gpm | 98.4 lpm total hydraulic flow points to quicker loader and cylinder movement, 3,050 psi pressure affects force more than speed, and 6,600 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 5470SA?
For implement matching, the useful checks are 26 gpm flow, 3,050 psi pressure, 6,600 lb listed lift, and 3 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and strong on hydraulic force if the cylinders and relief settings match, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 5470SA rear lift capacity strong?
The listed lift figure is 6600 lbs | 2993 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Massey Ferguson 5470SA hydraulic remotes enough?
The Massey Ferguson 5470SA lists 3 for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the Massey Ferguson 5470SA hydraulics handle long hydraulic jobs?
The useful heat clues are 26 gpm flow, 3,050 psi pressure, and about 46.3 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 5470SA make on paper?
Using 3,050 psi and 26 gpm, the rough pressure-flow estimate is about 46.3 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 5470SA hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 6600 lbs | 2993 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
