The Massey Ferguson 4292 tractor hydraulic capacity is 12.2 gal | 46.2 L, pump flow is 17.7 gpm | 67.0 lpm, and hydraulic pressure is 2466 psi | 170.0 bar.
about 25.5 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
46.2 L capacity with 17.7 gpm pump flow
Massey Ferguson 4292 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
12.2 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
17.7 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,466 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Is the Massey Ferguson 4292 hydraulic capacity big or small for its size?
The Massey Ferguson 4292 lists 12.2 gal | 46.2 L of hydraulic capacity, which is below the 18 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Massey Ferguson 4292 hydraulics feel fast or slow?
The useful speed clue is 17.7 gpm | 67.0 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Massey Ferguson 4292 hydraulic pressure tell you?
The pressure spec is 2466 psi | 170.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 4292?
On the Massey Ferguson 4292, 17.7 gpm | 67.0 lpm pump flow points to quicker loader and cylinder movement and 2,466 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 4292?
For implement matching, the useful checks are 17.7 gpm flow, 2,466 psi pressure, 2 or 3 remote/valve listing, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the Massey Ferguson 4292 hydraulic remotes enough?
The Massey Ferguson 4292 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 4292 hydraulics handle long hydraulic jobs?
The useful heat clues are 12.2 gal of hydraulic capacity, 17.7 gpm flow, 2,466 psi pressure, and about 25.5 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 4292 make on paper?
Using 2,466 psi and 17.7 gpm, the rough pressure-flow estimate is about 25.5 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 4292 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 4292 hydraulics?
For service planning, the oil-volume figure is 12.2 gal | 46.2 L, pressure is listed at 2,466 psi, and flow is listed at 17.7 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
