Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 2625 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 2625, but total hydraulic flow is 14.5 gpm | 54.9 lpm and lift is listed as 12,570 lbs | 5701 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 2625 hydraulics feel fast or slow?
The useful speed clue is 14.5 gpm | 54.9 lpm total hydraulic flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Massey Ferguson 2625?
On the Massey Ferguson 2625, 14.5 gpm | 54.9 lpm total hydraulic flow points to slower loader and cylinder movement and 12,570 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 2625?
For implement matching, the useful checks are 14.5 gpm flow and 12,570 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 2625 rear lift capacity strong?
The listed lift figure is 12,570 lbs | 5701 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 2625 hydraulics handle long hydraulic jobs?
The useful heat clues are 14.5 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Massey Ferguson 2625 hydraulics?
For service planning, flow is listed at 14.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
