The Massey Ferguson 383 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.5 gpm (aux pump) | 36.0 lpm, hydraulic pressure is 3000 psi | 206.8 bar, and hydraulic type is open center.
Hydraulic Flow9.5 gpm (aux pump) | 36.0 lpm
Pressure3000 psi | 206.8 bar
Hydraulic Typeopen center
Lift Capacity5410 lbs * Capacity with links horizontal 2453 kg
about 16.6 hydraulic hp from listed pressure and pump flow
Massey Ferguson 383 Hydraulic Comparison Charts
Pump flow comparison
This model
9.5 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
3,000 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
5,410 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 383 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 383, but pump flow is 9.5 gpm (aux pump) | 36.0 lpm, pressure is 3000 psi | 206.8 bar, system type is open center, and lift is listed as 5410 lbs * Capacity with links horizontal 2453 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 383 hydraulics feel fast or slow?
The useful speed clue is 9.5 gpm (aux pump) | 36.0 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 383 hydraulic pressure tell you?
The pressure spec is 3000 psi | 206.8 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Massey Ferguson 383?
On the Massey Ferguson 383, 9.5 gpm (aux pump) | 36.0 lpm pump flow points to slower loader and cylinder movement, 3,000 psi pressure affects force more than speed, and 5,410 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 383?
For implement matching, the useful checks are 9.5 gpm flow, 3,000 psi pressure, 5,410 lb listed lift, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, strong on hydraulic force if the cylinders and relief settings match, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 383 rear lift capacity strong?
The listed lift figure is 5410 lbs * Capacity with links horizontal 2453 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 383 hydraulics handle long hydraulic jobs?
The useful heat clues are 9.5 gpm flow, 3,000 psi pressure, and about 16.6 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 383 make on paper?
Using 3,000 psi and 9.5 gpm, the rough pressure-flow estimate is about 16.6 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 383 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position and draft control, and listed lift is 5410 lbs * Capacity with links horizontal 2453 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Massey Ferguson 383 use?
The hydraulic system is listed as open center with 9.5 gpm (aux pump) | 36.0 lpm pump flow and 3000 psi | 206.8 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
