The Case IH Puma 155 tractor hydraulic capacity is 19.6 gal | 74.2 L, pump flow is 26.5 gpm | 100.3 lpm, and hydraulic type is closed center pressure flow compensated (PFC).
Case IH Puma 155 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center pressure flow compensated (PFC) |
|---|---|
| Hydraulic capacity | 19.6 gal | 74.2 L |
| Pump flow | 26.5 gpm | 100.3 lpm |
| Total hydraulic flow | 43.7 gpm | 165.4 lpm |
| Steering flow | 17 gpm | 64.3 lpm |
| Hydraulic valves | 2 to 4 |
Case IH Puma 155 Hitch, Remote & Lift Specs
| Rear hitch type | 2/3N |
|---|---|
| Rear hitch control | electronic draft control |
| Rear lift | 12,185 lbs | 5527 kg |
Case IH Puma 155 Useful Hydraulic Calculations
| Pump flow per gallon of hydraulic capacity | 1.4 gpm per gal |
|---|---|
| Hydraulic tank turnover estimate | about 0.7 minutes at rated pump flow |
| Total flow vs pump flow | 164.9% of listed pump flow |
| Steering flow vs pump flow | 64.2% of listed pump flow |
| Rear lift per pump gpm | 459.8 lb per gpm |
| Rear lift per hydraulic gallon | 621.7 lb per gal |
| Metric capacity vs pump flow | 74.2 L capacity with 26.5 gpm pump flow |
Case IH Puma 155 Hydraulic Comparison Charts
Hydraulic capacity comparison
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Puma 155 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
Case IH Puma 155 Hydraulic Capacity FAQ
Is the Case IH Puma 155 hydraulic capacity big or small for its size?
The Case IH Puma 155 lists 19.6 gal | 74.2 L of hydraulic capacity, which is below the 42 gal benchmark for this group. Real talk: that is not automatically bad, but it gives you less oil volume as a heat buffer during loader work, hydraulic motors or long remote use.
Will the Case IH Puma 155 hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Puma 155?
On the Case IH Puma 155, 26.5 gpm | 100.3 lpm pump flow points to slower loader and cylinder movement and 12,185 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Puma 155?
For implement matching, the useful checks are 26.5 gpm flow, 12,185 lb listed lift, 2 to 4 remote/valve listing, and 2/3N hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, best kept realistic on heavy rear implements, and has less oil volume to absorb heat during long hydraulic jobs, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Puma 155 rear lift capacity strong?
The listed lift figure is 12,185 lbs | 5527 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH Puma 155 hydraulic remotes enough?
The Case IH Puma 155 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Puma 155 hydraulics handle long hydraulic jobs?
The useful heat clues are 19.6 gal of hydraulic capacity and 26.5 gpm flow. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
What do the Case IH Puma 155 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/3N, hitch control is electronic draft control, and listed lift is 12,185 lbs | 5527 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Puma 155 use?
The hydraulic system is listed as closed center pressure flow compensated (PFC) with 26.5 gpm | 100.3 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Puma 155 hydraulics?
For service planning, the oil-volume figure is 19.6 gal | 74.2 L, the system is listed as closed center pressure flow compensated (PFC), and flow is listed at 26.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
