The Case IH Maxxum 140 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 26.5 gpm | 100.3 lpm, hydraulic type is closed center PFC, and valves/remotes are listed as 2 to 4.
Case IH Maxxum 140 Hydraulic Capacity & Flow Specs
| Hydraulic type | closed center PFC |
|---|---|
| Pump flow | 26.5 gpm | 100.3 lpm |
| Total hydraulic flow | 37 gpm | 140.0 lpm |
| Steering flow | 10.5 gpm | 39.7 lpm |
| Hydraulic valves | 2 to 4 |
Case IH Maxxum 140 Hitch, Remote & Lift Specs
| Rear hitch type | 2/3N |
|---|---|
| Rear hitch control | electronic draft control |
| Rear lift | 12,185 lbs | 5527 kg |
| Front lift | 8157 lbs | 3700 kg |
Case IH Maxxum 140 Useful Hydraulic Calculations
| Total flow vs pump flow | 139.6% of listed pump flow |
|---|---|
| Steering flow vs pump flow | 39.6% of listed pump flow |
| Rear lift per pump gpm | 459.8 lb per gpm |
Case IH Maxxum 140 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Maxxum 140 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
| Differential lock | electro-hydraulic |
Case IH Maxxum 140 Hydraulic Capacity FAQ
Why is the Case IH Maxxum 140 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Maxxum 140, but pump flow is 26.5 gpm | 100.3 lpm, system type is closed center PFC, and lift is listed as 12,185 lbs | 5527 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Maxxum 140 hydraulics feel fast or slow?
The useful speed clue is 26.5 gpm | 100.3 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Maxxum 140?
On the Case IH Maxxum 140, 26.5 gpm | 100.3 lpm pump flow points to slower loader and cylinder movement and 12,185 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Maxxum 140?
For implement matching, the useful checks are 26.5 gpm flow, 12,185 lb listed lift, 2 to 4 remote/valve listing, and 2/3N hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Maxxum 140 rear lift capacity strong?
The listed lift figure is 12,185 lbs | 5527 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH Maxxum 140 hydraulic remotes enough?
The Case IH Maxxum 140 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Maxxum 140 hydraulics handle long hydraulic jobs?
The useful heat clues are 26.5 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Maxxum 140 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/3N, hitch control is electronic draft control, and listed lift is 12,185 lbs | 5527 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Maxxum 140 use?
The hydraulic system is listed as closed center PFC with 26.5 gpm | 100.3 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Maxxum 140 hydraulics?
For service planning, the system is listed as closed center PFC and flow is listed at 26.5 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
