The Case IH MX90C tractor hydraulic capacity is 17.5 gal | 66.2 L, pump flow is 25 gpm | 94.6 lpm, and hydraulic pressure is 2950 psi | 203.4 bar.
Hydraulic Capacity17.5 gal | 66.2 L
Hydraulic Flow25 gpm | 94.6 lpm
Pressure2950 psi | 203.4 bar
Hydraulic Typeclosed center pressure-flow compensating (PFC)
Valves / Remotes2 to 4
Lift Capacity8,393 lbs | 3807 kg
Case IH MX90C Hydraulic Capacity & Flow Specs
Hydraulic type
closed center pressure-flow compensating (PFC)
Hydraulic capacity
17.5 gal | 66.2 L
Hydraulic pressure
2950 psi | 203.4 bar
Pump flow
25 gpm | 94.6 lpm
Total hydraulic flow
28.9 gpm | 109.4 lpm
Hydraulic valves
2 to 4
Case IH MX90C Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
electronic lower link
Rear lift at 24 inches
8,393 lbs | 3807 kg
Case IH MX90C Useful Hydraulic Calculations
Pump flow per gallon of hydraulic capacity
1.4 gpm per gal
Hydraulic tank turnover estimate
about 0.7 minutes at rated pump flow
Total flow vs pump flow
115.6% of listed pump flow
Rear lift per pump gpm
335.7 lb per gpm
Rear lift per hydraulic gallon
479.6 lb per gal
Estimated hydraulic horsepower
about 43 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
66.2 L capacity with 25 gpm pump flow
Case IH MX90C Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
17.5 gal
Average
18 gal
Low
8 gal
High
32 gal
Pump flow comparison
This model
25 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,950 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
8,393 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH MX90C Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
hydraulic wet disc brakes
Case IH MX90C Hydraulic Capacity FAQ
Is the Case IH MX90C hydraulic capacity big or small for its size?
The Case IH MX90C lists 17.5 gal | 66.2 L of hydraulic capacity, which is close to the 18 gal benchmark for this group. It is a normal-sized hydraulic oil volume for this tractor class, so the bigger performance clues are flow, pressure and lift.
Will the Case IH MX90C hydraulics feel fast or slow?
The useful speed clue is 25 gpm | 94.6 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH MX90C hydraulic pressure tell you?
The pressure spec is 2950 psi | 203.4 bar, above the 2,600 psi benchmark. That gives the system stronger force potential, but the implement, hoses, couplers and relief settings still have to match.
What matters most for loader speed on the Case IH MX90C?
On the Case IH MX90C, 25 gpm | 94.6 lpm pump flow points to quicker loader and cylinder movement, 2,950 psi pressure affects force more than speed, and 8,393 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH MX90C?
For implement matching, the useful checks are 25 gpm flow, 2,950 psi pressure, 8,393 lb listed lift, and 2 to 4 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, strong on hydraulic force if the cylinders and relief settings match, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH MX90C rear lift capacity strong?
The listed lift figure is 8,393 lbs | 3807 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH MX90C hydraulic remotes enough?
The Case IH MX90C remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH MX90C hydraulics handle long hydraulic jobs?
The useful heat clues are 17.5 gal of hydraulic capacity, 25 gpm flow, 2,950 psi pressure, and about 43 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Case IH MX90C make on paper?
Using 2,950 psi and 25 gpm, the rough pressure-flow estimate is about 43 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH MX90C hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower link, and listed lift is 8,393 lbs | 3807 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
