The Case IH JXU 95 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.1 gpm | 60.9 lpm, and valves/remotes are listed as 3 Optional.
Case IH JXU 95 Hydraulic Capacity & Flow Specs
| Pump flow | 16.1 gpm | 60.9 lpm |
|---|---|
| Steering flow | 9.5 gpm | 36.0 lpm |
| Rear remotes | 3 Optional |
Case IH JXU 95 Hitch, Remote & Lift Specs
| Rear lift | 10803 lbs | 4900 kg |
|---|---|
| Front lift | 5512 lbs | 2500 kg |
Case IH JXU 95 Useful Hydraulic Calculations
| Steering flow vs pump flow | 59% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 671 lb per gpm |
Case IH JXU 95 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH JXU 95 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
| Trailer brakes | hydraulic Optional |
| Differential lock | Electro-hydraulic rear and limited slip front. Electro-hydraulic front Optional |
Case IH JXU 95 Hydraulic Capacity FAQ
Why is the Case IH JXU 95 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH JXU 95, but pump flow is 16.1 gpm | 60.9 lpm and lift is listed as 10803 lbs | 4900 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH JXU 95 hydraulics feel fast or slow?
The useful speed clue is 16.1 gpm | 60.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH JXU 95?
On the Case IH JXU 95, 16.1 gpm | 60.9 lpm pump flow points to quicker loader and cylinder movement and 10,803 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH JXU 95?
For implement matching, the useful checks are 16.1 gpm flow, 10,803 lb listed lift, and 3 Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH JXU 95 rear lift capacity strong?
The listed lift figure is 10803 lbs | 4900 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH JXU 95 hydraulic remotes enough?
The Case IH JXU 95 remote/valve listing is 3 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH JXU 95 hydraulics handle long hydraulic jobs?
The useful heat clues are 16.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Case IH JXU 95 hydraulics?
For service planning, flow is listed at 16.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
