The Case IH Luxxum 120 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 21.1 gpm | 79.9 lpm, hydraulic type is closed center load sensing, and valves/remotes are listed as 4 Optional.
Hydraulic Flow21.1 gpm | 79.9 lpm
Hydraulic Typeclosed center load sensing
Valves / Remotes4 Optional
Case IH Luxxum 120 Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load sensing
Pump flow
21.1 gpm | 79.9 lpm
Rear remotes
4 Optional
Case IH Luxxum 120 Hydraulic Comparison Charts
Pump flow comparison
This model
21.1 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Luxxum 120 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Differential lock
electro-hydraulic front and rear
Case IH Luxxum 120 Hydraulic Capacity FAQ
Why is the Case IH Luxxum 120 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Luxxum 120, but pump flow is 21.1 gpm | 79.9 lpm and system type is closed center load sensing. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Luxxum 120 hydraulics feel fast or slow?
The useful speed clue is 21.1 gpm | 79.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Luxxum 120?
On the Case IH Luxxum 120, 21.1 gpm | 79.9 lpm pump flow points to quicker loader and cylinder movement. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Luxxum 120?
For implement matching, the useful checks are 21.1 gpm flow and 4 Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the Case IH Luxxum 120 hydraulic remotes enough?
The Case IH Luxxum 120 remote/valve listing is 4 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Luxxum 120 hydraulics handle long hydraulic jobs?
The useful heat clues are 21.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What hydraulic system does the Case IH Luxxum 120 use?
The hydraulic system is listed as closed center load sensing with 21.1 gpm | 79.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Luxxum 120 hydraulics?
For service planning, the system is listed as closed center load sensing and flow is listed at 21.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
