The Case IH Farmall 105V tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.9 gpm | 64.0 lpm, hydraulic pressure is 2755 psi | 190.0 bar, and hydraulic type is open center.
Hydraulic Flow16.9 gpm | 64.0 lpm
Pressure2755 psi | 190.0 bar
Hydraulic Typeopen center
Valves / Remotes2 or 3
Lift Capacity4045 lbs | 1834 kg
Case IH Farmall 105V Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2755 psi | 190.0 bar
Pump flow
16.9 gpm | 64.0 lpm
Total hydraulic flow
26.4 gpm | 99.9 lpm
Steering flow
9.2 gpm | 34.8 lpm
Rear remotes
2 or 3
Case IH Farmall 105V Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
mechanical draft control
Rear lift at 24 inches
4045 lbs | 1834 kg
Case IH Farmall 105V Useful Hydraulic Calculations
Total flow vs pump flow
156.2% of listed pump flow
Steering flow vs pump flow
54.4% of listed pump flow
Rear lift per pump gpm
239.3 lb per gpm
Estimated hydraulic horsepower
about 27.2 hydraulic hp from listed pressure and pump flow
Case IH Farmall 105V Hydraulic Comparison Charts
Pump flow comparison
This model
16.9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,755 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
4,045 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 105V Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Hydraulic wet disc brakes
Case IH Farmall 105V Hydraulic Capacity FAQ
Why is the Case IH Farmall 105V hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 105V, but pump flow is 16.9 gpm | 64.0 lpm, pressure is 2755 psi | 190.0 bar, system type is open center, and lift is listed as 4045 lbs | 1834 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 105V hydraulics feel fast or slow?
The useful speed clue is 16.9 gpm | 64.0 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Case IH Farmall 105V hydraulic pressure tell you?
The pressure spec is 2755 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH Farmall 105V?
On the Case IH Farmall 105V, 16.9 gpm | 64.0 lpm pump flow points to quicker loader and cylinder movement, 2,755 psi pressure affects force more than speed, and 4,045 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 105V?
For implement matching, the useful checks are 16.9 gpm flow, 2,755 psi pressure, 4,045 lb listed lift, and 2 or 3 remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 105V rear lift capacity strong?
The listed lift figure is 4045 lbs | 1834 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH Farmall 105V hydraulic remotes enough?
The Case IH Farmall 105V remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Farmall 105V hydraulics handle long hydraulic jobs?
The useful heat clues are 16.9 gpm flow, 2,755 psi pressure, and about 27.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH Farmall 105V make on paper?
Using 2,755 psi and 16.9 gpm, the rough pressure-flow estimate is about 27.2 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH Farmall 105V hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is mechanical draft control, and listed lift is 4045 lbs | 1834 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
