The Case IH C48 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 7.7 gpm | 29.1 lpm.
Case IH C48 Hydraulic Capacity & Flow Specs
| Total hydraulic flow | 7.7 gpm | 29.1 lpm |
|---|
Case IH C48 Hitch, Remote & Lift Specs
| Rear lift | 4410 lbs | 2000 kg |
|---|
Case IH C48 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH C48 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Disc brakes |
Case IH C48 Hydraulic Capacity FAQ
Why is the Case IH C48 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH C48, but total hydraulic flow is 7.7 gpm | 29.1 lpm and lift is listed as 4410 lbs | 2000 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH C48 hydraulics feel fast or slow?
The useful speed clue is 7.7 gpm | 29.1 lpm total hydraulic flow, close to the 8 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the Case IH C48?
On the Case IH C48, 7.7 gpm | 29.1 lpm total hydraulic flow is around normal for loader/cylinder speed and 4,410 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH C48?
For implement matching, the useful checks are 7.7 gpm flow and 4,410 lb listed lift. That combination is in the normal flow range for this size group and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH C48 rear lift capacity strong?
The listed lift figure is 4410 lbs | 2000 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the Case IH C48 hydraulics handle long hydraulic jobs?
The useful heat clues are 7.7 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Case IH C48 hydraulics?
For service planning, flow is listed at 7.7 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
