The Case IH C64 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.4 gpm | 43.1 lpm.
Case IH C64 Hydraulic Capacity & Flow Specs
| Total hydraulic flow | 11.4 gpm | 43.1 lpm |
|---|
Case IH C64 Hitch, Remote & Lift Specs
| Rear lift | 5953.5 lbs | 2700 kg |
|---|
Case IH C64 Hydraulic Comparison Charts
Pump flow comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH C64 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Disc brakes |
Case IH C64 Hydraulic Capacity FAQ
Why is the Case IH C64 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH C64, but total hydraulic flow is 11.4 gpm | 43.1 lpm and lift is listed as 5953.5 lbs | 2700 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH C64 hydraulics feel fast or slow?
The useful speed clue is 11.4 gpm | 43.1 lpm total hydraulic flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH C64?
On the Case IH C64, 11.4 gpm | 43.1 lpm total hydraulic flow points to slower loader and cylinder movement and 5,953.5 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH C64?
For implement matching, the useful checks are 11.4 gpm flow and 5,953.5 lb listed lift. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH C64 rear lift capacity strong?
The listed lift figure is 5953.5 lbs | 2700 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Case IH C64 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.4 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What should you check before servicing the Case IH C64 hydraulics?
For service planning, flow is listed at 11.4 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
