The New Holland TS110A tractor engine horsepower is 110 hp | 82.0 kW, and PTO horsepower is 90 hp | 67.1 kW.
Engine HP110 hp | 82.0 kW
PTO HP90 hp | 67.1 kW
PTO Transfer81.8%
Torque383.5 lb-ft | 520.0 Nm
Displacement273.7 ci | 4.5 L
New Holland TS110A Horsepower Specs
Engine gross horsepower
110 hp | 82.0 kW
PTO horsepower claimed
90 hp | 67.1 kW
New Holland TS110A Useful Horsepower Calculations
PTO-to-engine power transfer
81.8% of engine hp reaches the PTO
Engine size per PTO horsepower
3 ci per PTO hp
PTO horsepower per liter
20 PTO hp per L
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
24.4 engine hp per L
Torque per PTO horsepower
4.3 lb-ft per PTO hp
Rated speed per PTO horsepower
24.4 rpm per PTO hp
New Holland TS110A Engine Specs
Engine type
turbocharged intercooled diesel
Displacement
273.7 ci | 4.5 L
Bore and stroke
4.09×5.20 inches | 104 x 132 mm
Rated RPM
2200
Torque
383.5 lb-ft | 520.0 Nm
Torque RPM
1400
New Holland TS110A Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Firing order
1-3-4-2
Idle RPM
650-2400
New Holland TS110A Horsepower Comparison Charts
Engine horsepower comparison
This model
110 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
90 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
273.7 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
383.5 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
3 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland TS110A Horsepower FAQ
How much horsepower does the New Holland TS110A have?
The listed engine output is 110 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 110 hp.
How much PTO horsepower does the New Holland TS110A have?
The listed PTO output is 90 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 90 hp.
How much engine power reaches the PTO on the New Holland TS110A?
The PTO-to-engine transfer works out to 81.8%, from 110 engine hp to 90 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the New Holland TS110A engine?
The engine displacement is 273.7 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the New Holland TS110A engine stressed for its PTO horsepower?
The engine has about 3 cubic inches per PTO hp, using 273.7 ci and 90 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the New Holland TS110A make?
The output density is about 20 PTO hp per liter, using 90 PTO hp and 4.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the New Holland TS110A have?
The listed torque is 383.5 lb-ft, above the 240 lb-ft benchmark average. The 383.5 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the New Holland TS110A have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 4.3 lb-ft per PTO hp, using 383.5 lb-ft and 90 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the New Holland TS110A rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
