The New Holland T3020 tractor engine horsepower is 42.8 hp | 31.9 kW.
New Holland T3020 Horsepower Specs
| Engine horsepower | 42.8 hp | 31.9 kW |
|---|
New Holland T3020 Useful Horsepower Calculations
| Engine size per engine horsepower | 2.8 ci per engine hp |
|---|---|
| Engine horsepower per liter | 21.4 engine hp per L |
New Holland T3020 Engine Specs
| Displacement | 121.7 ci | 2.0 L |
|---|---|
| Bore and stroke | 3.31×3.54 inches | 84 x 90 mm |
| Rated RPM | 2800 |
| Torque | 95 lb-ft | 128.8 Nm |
| Torque RPM | 1400 |
New Holland T3020 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
New Holland T3020 Horsepower Comparison Charts
Engine horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland T3020 Horsepower FAQ
How much horsepower does the New Holland T3020 have?
The listed engine output is 42.8 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 42.8 hp.
How big is the New Holland T3020 engine?
The engine displacement is 121.7 ci, close to the 110 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
How much torque does the New Holland T3020 have?
The listed torque is 95 lb-ft, close to the 95 lb-ft benchmark average. The 95 lb-ft figure is a normal torque result for this class.
What rpm is the New Holland T3020 rated at?
The rated speed is 2,800 rpm, above the 2,400 rpm benchmark average. A higher 2,800 rpm rating can make power well but may feel busier under load.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
