The New Holland T5.120 Dynamic/Auto Command tractor engine horsepower is 108.5 hp | 80.9 kW.
Engine HP108.5 hp | 80.9 kW
Torque406.4 lb-ft | 551.1 Nm
Displacement273.7 ci | 4.5 L
New Holland T5.120 Dynamic/Auto Command Horsepower Specs
Engine gross horsepower
108.5 hp | 80.9 kW
New Holland T5.120 Dynamic/Auto Command Useful Horsepower Calculations
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
24.1 engine hp per L
New Holland T5.120 Dynamic/Auto Command Engine Specs
Engine type
turbocharged aftercooled diesel
Displacement
273.7 ci | 4.5 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Rated RPM
2200
Torque
406.4 lb-ft | 551.1 Nm
Torque RPM
1300
New Holland T5.120 Dynamic/Auto Command Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
New Holland T5.120 Dynamic/Auto Command Horsepower Comparison Charts
Engine horsepower comparison
This model
108.5 hp
Average
80 hp
Low
45 hp
High
120 hp
Displacement comparison
This model
273.7 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
406.4 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland T5.120 Dynamic/Auto Command Horsepower FAQ
How much horsepower does the New Holland T5.120 Dynamic/Auto Command have?
The listed engine output is 108.5 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 108.5 hp.
How big is the New Holland T5.120 Dynamic/Auto Command engine?
The engine displacement is 273.7 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
How much torque does the New Holland T5.120 Dynamic/Auto Command have?
The listed torque is 406.4 lb-ft, above the 240 lb-ft benchmark average. The 406.4 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
What rpm is the New Holland T5.120 Dynamic/Auto Command rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
