The New Holland 1120 tractor engine horsepower is 14.7 hp | 11.0 kW.
New Holland 1120 Horsepower Specs
| Engine gross horsepower | 14.7 hp | 11.0 kW |
|---|---|
| Engine net horsepower | 14 hp | 10.4 kW |
New Holland 1120 Useful Horsepower Calculations
| Engine size per engine horsepower | 3.6 ci per engine hp |
|---|---|
| Engine horsepower per liter | 16.3 engine hp per L |
New Holland 1120 Engine Specs
| Displacement | 53.6 ci | 0.9 L |
|---|---|
| Bore and stroke | 2.83×2.83 inches | 72 x 72 mm |
| Compression | 23:1 |
| Rated RPM | 2500 |
New Holland 1120 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
| Firing order | 1-2-3 |
| Idle RPM | 800-2700 |
| Intake valve clearance | Cold: 0.008 inches | 0.203 mm |
| Exhaust valve clearance | Cold: 0.008 inches | 0.203 mm |
New Holland 1120 Horsepower Comparison Charts
Engine horsepower comparison
Displacement comparison
Rated RPM comparison
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland 1120 Horsepower FAQ
How much horsepower does the New Holland 1120 have?
The listed engine output is 14.7 hp, below the 35 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 14.7 hp.
How big is the New Holland 1120 engine?
The engine displacement is 53.6 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
What rpm is the New Holland 1120 rated at?
The rated speed is 2,500 rpm, close to the 2,400 rpm benchmark average. The 2,500 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.

