Massey Ferguson 3630 Fuel, Cooling, Starting & Service Specs
Fuel capacity
69 gal | 261.2 L
Starter volts
12
Battery volts
12
Massey Ferguson 3630 Horsepower Comparison Charts
PTO horsepower comparison
This model
115 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
354 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
346 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,400 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
3.1 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 3630 Horsepower FAQ
How much PTO horsepower does the Massey Ferguson 3630 have?
The listed PTO output is 115 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 115 hp.
How big is the Massey Ferguson 3630 engine?
The engine displacement is 354 ci, above the 260 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 3630 engine stressed for its PTO horsepower?
The engine has about 3.1 cubic inches per PTO hp, using 354 ci and 115 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Massey Ferguson 3630 make?
The output density is about 19.8 PTO hp per liter, using 115 PTO hp and 5.8 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 3630 have?
The listed torque is 346 lb-ft, above the 240 lb-ft benchmark average. The 346 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Massey Ferguson 3630 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3 lb-ft per PTO hp, using 346 lb-ft and 115 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 3630 rated at?
The rated speed is 2,400 rpm, close to the 2,200 rpm benchmark average. The 2,400 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
