Massey Ferguson 1758 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Massey Ferguson 1758 Horsepower Comparison Charts
Engine horsepower comparison
This model
59 hp
Average
35 hp
Low
15 hp
High
60 hp
PTO horsepower comparison
This model
44.4 hp
Average
28 hp
Low
12 hp
High
50 hp
Displacement comparison
This model
134.7 ci
Average
110 ci
Low
50 ci
High
180 ci
Rated RPM comparison
This model
2,500 rpm
Average
2,400 rpm
Low
1,800 rpm
High
3,000 rpm
Engine size per PTO HP
This model
3 ci/hp
Average
3.1 ci/hp
Low
1.8 ci/hp
High
5 ci/hp
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 1758 Horsepower FAQ
How much horsepower does the Massey Ferguson 1758 have?
The listed engine output is 59 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 59 hp.
How much PTO horsepower does the Massey Ferguson 1758 have?
The listed PTO output is 44.4 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 44.4 hp.
How much engine power reaches the PTO on the Massey Ferguson 1758?
The PTO-to-engine transfer works out to 75.3%, from 59 engine hp to 44.4 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 1758 engine?
The engine displacement is 134.7 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Massey Ferguson 1758 engine stressed for its PTO horsepower?
The engine has about 3 cubic inches per PTO hp, using 134.7 ci and 44.4 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Massey Ferguson 1758 make?
The output density is about 20.2 PTO hp per liter, using 44.4 PTO hp and 2.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Massey Ferguson 1758 rated at?
The rated speed is 2,500 rpm, close to the 2,400 rpm benchmark average. The 2,500 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
