The Massey Ferguson 1150 tractor engine horsepower is 146 hp | 108.9 kW, PTO horsepower is 135 hp | 100.7 kW, and the drawbar horsepower is 120 hp | 89.5 kW.
Massey Ferguson 1150 Fuel, Cooling, Starting & Service Specs
Fuel capacity
50 gal | 189.2 L
Starter volts
12
Battery volts
12
Massey Ferguson 1150 Horsepower Comparison Charts
Engine horsepower comparison
This model
146 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
135 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
120 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
503.8 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
539 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.7 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 1150 Horsepower FAQ
How much horsepower does the Massey Ferguson 1150 have?
The listed engine output is 146 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 146 hp.
How much PTO horsepower does the Massey Ferguson 1150 have?
The listed PTO output is 135 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 135 hp rather than using a bigger engine-horsepower number.
How much drawbar horsepower does the Massey Ferguson 1150 have?
The listed drawbar output is 120 hp, below the 150 hp benchmark average. For pulling work, the safer assumption is about 120 hp at the drawbar before soil, ballast and tire limits are considered.
How much engine power reaches the PTO on the Massey Ferguson 1150?
The PTO-to-engine transfer works out to 92.5%, from 146 engine hp to 135 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.
How efficient is the Massey Ferguson 1150 for pulling work?
The drawbar-to-engine transfer is about 82.2%, from 146 engine hp to 120 drawbar hp. That is a strong pulling-efficiency number if the specs come from the same test setup.
Is the Massey Ferguson 1150 better judged by PTO hp or drawbar hp?
The drawbar output is about 88.9% of PTO output, comparing 120 drawbar hp with 135 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 1150 engine?
The engine displacement is 503.8 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 1150 engine stressed for its PTO horsepower?
The engine has about 3.7 cubic inches per PTO hp, using 503.8 ci and 135 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 1150 make?
The output density is about 16.3 PTO hp per liter, using 135 PTO hp and 8.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
