The Massey Ferguson 220 tractor engine horsepower is 31 hp | 23.1 kW, PTO horsepower is 26 hp | 19.4 kW, and the drawbar horsepower is 22.73 hp | 16.9 kW.
Massey Ferguson 220 Horsepower Specs
| Engine horsepower | 31 hp | 23.1 kW |
|---|---|
| PTO horsepower claimed | 26 hp | 19.4 kW |
| PTO horsepower tested | 26.48 hp | 19.7 kW |
| Drawbar horsepower tested | 22.73 hp | 16.9 kW |
Massey Ferguson 220 Useful Horsepower Calculations
| PTO-to-engine power transfer | 83.9% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 73.3% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 87.4% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 3.5 ci per PTO hp |
| PTO horsepower per liter | 17.3 PTO hp per L |
| Engine size per engine horsepower | 2.9 ci per engine hp |
| Engine horsepower per liter | 20.7 engine hp per L |
| Torque per PTO horsepower | 2.6 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 96.2 rpm per PTO hp |
Massey Ferguson 220 Engine Specs
| Displacement | 90.3 ci | 1.5 L |
|---|---|
| Bore and stroke | 3.82×3.94 inches | 97 x 100 mm |
| Compression | 23:1 |
| Rated RPM | 2500 |
| Torque | 67.3 lb-ft | 91.3 Nm |
| Torque RPM | 1700 |
Massey Ferguson 220 Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Massey Ferguson 220 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 220 Horsepower FAQ
How much horsepower does the Massey Ferguson 220 have?
The listed engine output is 31 hp, close to the 35 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 31 hp as the main engine number.
How much PTO horsepower does the Massey Ferguson 220 have?
The listed PTO output is 26 hp, close to the 28 hp benchmark average. Use 26 PTO hp as the practical implement-sizing number.
How much drawbar horsepower does the Massey Ferguson 220 have?
The listed drawbar output is 22.7 hp, close to the 24 hp benchmark average. It gives a realistic pulling-power figure of about 22.7 hp.
How much engine power reaches the PTO on the Massey Ferguson 220?
The PTO-to-engine transfer works out to 83.9%, from 31 engine hp to 26 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Massey Ferguson 220 for pulling work?
The drawbar-to-engine transfer is about 73.3%, from 31 engine hp to 22.7 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Massey Ferguson 220 better judged by PTO hp or drawbar hp?
The drawbar output is about 87.4% of PTO output, comparing 22.7 drawbar hp with 26 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Massey Ferguson 220 engine?
The engine displacement is 90.3 ci, below the 110 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 220 engine stressed for its PTO horsepower?
The engine has about 3.5 cubic inches per PTO hp, using 90.3 ci and 26 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Massey Ferguson 220 make?
The output density is about 17.3 PTO hp per liter, using 26 PTO hp and 1.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
