Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 133 Westland Horsepower FAQ
How much horsepower does the Massey Ferguson 133 Westland have?
The listed engine output is 45 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 45 hp.
How much PTO horsepower does the Massey Ferguson 133 Westland have?
The listed PTO output is 33.5 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 33.5 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Massey Ferguson 133 Westland?
The PTO-to-engine transfer works out to 74.4%, from 45 engine hp to 33.5 PTO hp. That is a noticeable drop, so implement sizing should be conservative.
How big is the Massey Ferguson 133 Westland engine?
The engine displacement is 152.7 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Massey Ferguson 133 Westland engine stressed for its PTO horsepower?
The engine has about 4.6 cubic inches per PTO hp, using 152.7 ci and 33.5 PTO hp. That points to a larger-displacement, lower-stress style setup.
How much PTO horsepower per liter does the Massey Ferguson 133 Westland make?
The output density is about 13.4 PTO hp per liter, using 33.5 PTO hp and 2.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 133 Westland have?
The listed torque is 131 lb-ft, below the 240 lb-ft benchmark average. With 131 lb-ft listed, gearing matters more when the tractor is loaded hard.
Does the Massey Ferguson 133 Westland have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.9 lb-ft per PTO hp, using 131 lb-ft and 33.5 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 133 Westland rated at?
The rated speed is 2,250 rpm, close to the 2,200 rpm benchmark average. The 2,250 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
