The Case IH Steiger 500 tractor engine horsepower is 500 hp | 372.9 kW, PTO horsepower is 508.03 hp | 378.8 kW, and the drawbar horsepower is 411.08 hp | 306.5 kW.
Case IH Steiger 500 Horsepower Specs
| Engine horsepower | 500 hp | 372.9 kW |
|---|---|
| PTO horsepower tested | 508.03 hp | 378.8 kW |
| Drawbar horsepower tested | 411.08 hp | 306.5 kW |
Case IH Steiger 500 Useful Horsepower Calculations
| PTO-to-engine power transfer | 101.6% of engine hp reaches the PTO |
|---|---|
| Drawbar-to-engine power transfer | 82.2% of engine hp reaches the drawbar |
| Drawbar-to-PTO power ratio | 80.9% drawbar hp vs PTO hp |
| Engine size per PTO horsepower | 1.5 ci per PTO hp |
| PTO horsepower per liter | 39.4 PTO hp per L |
| Engine size per engine horsepower | 1.6 ci per engine hp |
| Engine horsepower per liter | 38.8 engine hp per L |
| Rated speed per PTO horsepower | 4.1 rpm per PTO hp |
Case IH Steiger 500 Engine Specs
| Engine model | year |
|---|---|
| Engine type | wastegate turbocharged aftercooled diesel |
| Displacement | 787 ci | 12.9 L |
| Bore and stroke | 5.315×5.906 inches | 135 x 150 mm |
| Emissions | Interim Tier 4 |
| Rated RPM | 2100 |
Case IH Steiger 500 Fuel, Cooling, Starting & Service Specs
| Battery volts | 12 |
|---|
Case IH Steiger 500 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Drawbar horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Steiger 500 Horsepower FAQ
How much horsepower does the Case IH Steiger 500 have?
The listed engine output is 500 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 500 hp.
How much PTO horsepower does the Case IH Steiger 500 have?
The listed PTO output is 508 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 508 hp.
How much drawbar horsepower does the Case IH Steiger 500 have?
The listed drawbar output is 411.1 hp, above the 150 hp benchmark average. That makes the 411.1 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Case IH Steiger 500?
The PTO-to-engine transfer works out to 101.6%, from 500 engine hp to 508 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.
How efficient is the Case IH Steiger 500 for pulling work?
The drawbar-to-engine transfer is about 82.2%, from 500 engine hp to 411.1 drawbar hp. That is a strong pulling-efficiency number if the specs come from the same test setup.
Is the Case IH Steiger 500 better judged by PTO hp or drawbar hp?
The drawbar output is about 80.9% of PTO output, comparing 411.1 drawbar hp with 508 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Steiger 500 engine?
The engine displacement is 787 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH Steiger 500 engine stressed for its PTO horsepower?
The engine has about 1.6 cubic inches per PTO hp, using 787 ci and 508 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Steiger 500 make?
The output density is about 39.4 PTO hp per liter, using 508 PTO hp and 12.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
