The Case IH Steiger 470 tractor engine horsepower is 470 hp | 350.5 kW, PTO horsepower is 405 hp | 302.0 kW, and the drawbar horsepower is 387.67 hp | 289.1 kW.
Engine HP470 hp | 350.5 kW
PTO HP405 hp | 302.0 kW
Drawbar HP387.67 hp | 289.1 kW
PTO Transfer86.2%
Displacement787 ci | 12.9 L
Case IH Steiger 470 Horsepower Specs
Engine horsepower
470 hp | 350.5 kW
PTO horsepower claimed
405 hp | 302.0 kW
PTO horsepower tested
468.35 hp | 349.2 kW
Drawbar horsepower tested
387.67 hp | 289.1 kW
Case IH Steiger 470 Useful Horsepower Calculations
Case IH Steiger 470 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Case IH Steiger 470 Horsepower Comparison Charts
Engine horsepower comparison
This model
470 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
405 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
387.7 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
787 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,100 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
1.9 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Steiger 470 Horsepower FAQ
How much horsepower does the Case IH Steiger 470 have?
The listed engine output is 470 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 470 hp.
How much PTO horsepower does the Case IH Steiger 470 have?
The listed PTO output is 405 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 405 hp.
How much drawbar horsepower does the Case IH Steiger 470 have?
The listed drawbar output is 387.7 hp, above the 150 hp benchmark average. That makes the 387.7 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Case IH Steiger 470?
The PTO-to-engine transfer works out to 86.2%, from 470 engine hp to 405 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Steiger 470 for pulling work?
The drawbar-to-engine transfer is about 82.5%, from 470 engine hp to 387.7 drawbar hp. That is a strong pulling-efficiency number if the specs come from the same test setup.
Is the Case IH Steiger 470 better judged by PTO hp or drawbar hp?
The drawbar output is about 95.7% of PTO output, comparing 387.7 drawbar hp with 405 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Steiger 470 engine?
The engine displacement is 787 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH Steiger 470 engine stressed for its PTO horsepower?
The engine has about 1.9 cubic inches per PTO hp, using 787 ci and 405 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Steiger 470 make?
The output density is about 31.4 PTO hp per liter, using 405 PTO hp and 12.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
