Case IH Steiger 450 Rowtrac Horsepower & PTO HP

Quick answer:

The Case IH Steiger 450 Rowtrac tractor engine horsepower is 450 hp | 335.6 kW, PTO horsepower is 385 hp | 287.1 kW, and the drawbar horsepower is 352.92 hp | 263.2 kW.

Engine HP450 hp | 335.6 kW
PTO HP385 hp | 287.1 kW
Drawbar HP352.92 hp | 263.2 kW
PTO Transfer85.6%
Displacement787 ci | 12.9 L

Case IH Steiger 450 Rowtrac Horsepower Specs

Engine horsepower 450 hp | 335.6 kW
PTO horsepower claimed 385 hp | 287.1 kW
PTO horsepower tested 453.89 hp | 338.5 kW
Drawbar horsepower tested 352.92 hp | 263.2 kW

Case IH Steiger 450 Rowtrac Useful Horsepower Calculations

PTO-to-engine power transfer 85.6% of engine hp reaches the PTO
Drawbar-to-engine power transfer 78.4% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 91.7% drawbar hp vs PTO hp
Engine size per PTO horsepower 2 ci per PTO hp
PTO horsepower per liter 29.8 PTO hp per L
Engine size per engine horsepower 1.7 ci per engine hp
Engine horsepower per liter 34.9 engine hp per L
Rated speed per PTO horsepower 5.5 rpm per PTO hp

Case IH Steiger 450 Rowtrac Engine Specs

Engine type turbocharged air-to-air aftercooled diesel
Displacement 787 ci | 12.9 L
Bore and stroke 5.315×5.906 inches | 135 x 150 mm
Emissions Interim Tier 4
Rated RPM 2100

Case IH Steiger 450 Rowtrac Fuel, Cooling, Starting & Service Specs

Starter volts 12
Battery volts 12

Case IH Steiger 450 Rowtrac Horsepower Comparison Charts

Engine horsepower comparison

This model

450 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

385 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

352.9 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

787 ci

Average

520 ci

Low

360 ci

High

750 ci

Rated RPM comparison

This model

2,100 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

2 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH Steiger 450 Rowtrac Horsepower FAQ

How much horsepower does the Case IH Steiger 450 Rowtrac have?

The listed engine output is 450 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 450 hp.

How much PTO horsepower does the Case IH Steiger 450 Rowtrac have?

The listed PTO output is 385 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 385 hp.

How much drawbar horsepower does the Case IH Steiger 450 Rowtrac have?

The listed drawbar output is 352.9 hp, above the 150 hp benchmark average. That makes the 352.9 hp drawbar number more useful than engine hp for tillage and heavy pulling.

How much engine power reaches the PTO on the Case IH Steiger 450 Rowtrac?

The PTO-to-engine transfer works out to 85.6%, from 450 engine hp to 385 PTO hp. That is a normal usable range for judging PTO implement fit.

How efficient is the Case IH Steiger 450 Rowtrac for pulling work?

The drawbar-to-engine transfer is about 78.4%, from 450 engine hp to 352.9 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the Case IH Steiger 450 Rowtrac better judged by PTO hp or drawbar hp?

The drawbar output is about 91.7% of PTO output, comparing 352.9 drawbar hp with 385 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the Case IH Steiger 450 Rowtrac engine?

The engine displacement is 787 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.

Is the Case IH Steiger 450 Rowtrac engine stressed for its PTO horsepower?

The engine has about 2 cubic inches per PTO hp, using 787 ci and 385 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the Case IH Steiger 450 Rowtrac make?

The output density is about 29.8 PTO hp per liter, using 385 PTO hp and 12.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.