The Case IH Luxxum 110 tractor engine horsepower is 107 hp | 79.8 kW.
Engine HP107 hp | 79.8 kW
Torque348 lb-ft | 471.9 Nm
Displacement207 ci | 3.4 L
Case IH Luxxum 110 Horsepower Specs
Engine gross horsepower
107 hp | 79.8 kW
Case IH Luxxum 110 Useful Horsepower Calculations
Engine size per engine horsepower
1.9 ci per engine hp
Engine horsepower per liter
31.5 engine hp per L
Case IH Luxxum 110 Engine Specs
Engine model
year
Engine type
turbocharged diesel
Displacement
207 ci | 3.4 L
Bore and stroke
3.90×4.33 inches | 99 x 110 mm
Rated RPM
2200
Torque
348 lb-ft | 471.9 Nm
Torque RPM
1500
Case IH Luxxum 110 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Case IH Luxxum 110 Horsepower Comparison Charts
Engine horsepower comparison
This model
107 hp
Average
80 hp
Low
45 hp
High
120 hp
Displacement comparison
This model
207 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
348 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Luxxum 110 Horsepower FAQ
How much horsepower does the Case IH Luxxum 110 have?
The listed engine output is 107 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 107 hp.
How big is the Case IH Luxxum 110 engine?
The engine displacement is 207 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
How much torque does the Case IH Luxxum 110 have?
The listed torque is 348 lb-ft, above the 240 lb-ft benchmark average. The 348 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
What rpm is the Case IH Luxxum 110 rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
