The Case IH JX1095N tractor engine horsepower is 91 hp | 67.9 kW, and PTO horsepower is 80 hp | 59.7 kW.
Case IH JX1095N Horsepower Specs
| Engine gross horsepower | 91 hp | 67.9 kW |
|---|---|
| PTO horsepower claimed | 80 hp | 59.7 kW |
Case IH JX1095N Useful Horsepower Calculations
| PTO-to-engine power transfer | 87.9% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 3 ci per PTO hp |
| PTO horsepower per liter | 20.5 PTO hp per L |
| Engine size per engine horsepower | 2.6 ci per engine hp |
| Engine horsepower per liter | 23.3 engine hp per L |
| Torque per PTO horsepower | 3.3 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 28.8 rpm per PTO hp |
Case IH JX1095N Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 238 ci | 3.9 L |
| Bore and stroke | 4.094×4.528 inches | 104 x 115 mm |
| Rated RPM | 2300 |
| Torque | 264 lb-ft | 358.0 Nm |
| Torque RPM | 1400 |
Case IH JX1095N Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Case IH JX1095N Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH JX1095N Horsepower FAQ
How much horsepower does the Case IH JX1095N have?
The listed engine output is 91 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 91 hp.
How much PTO horsepower does the Case IH JX1095N have?
The listed PTO output is 80 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 80 hp.
How much engine power reaches the PTO on the Case IH JX1095N?
The PTO-to-engine transfer works out to 87.9%, from 91 engine hp to 80 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH JX1095N engine?
The engine displacement is 238 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH JX1095N engine stressed for its PTO horsepower?
The engine has about 3 cubic inches per PTO hp, using 238 ci and 80 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH JX1095N make?
The output density is about 20.5 PTO hp per liter, using 80 PTO hp and 3.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH JX1095N have?
The listed torque is 264 lb-ft, close to the 240 lb-ft benchmark average. The 264 lb-ft figure is a normal torque result for this class.
Does the Case IH JX1095N have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.3 lb-ft per PTO hp, using 264 lb-ft and 80 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH JX1095N rated at?
The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
