Case IH 9270 Horsepower & PTO HP

Quick answer:

The Case IH 9270 tractor engine horsepower is 335 hp | 249.8 kW, PTO horsepower is 308 hp | 229.7 kW, and the drawbar horsepower is 264.77 hp | 197.4 kW.

Engine HP335 hp | 249.8 kW
PTO HP308 hp | 229.7 kW
Drawbar HP264.77 hp | 197.4 kW
PTO Transfer91.9%
Torque1131 lb-ft | 1533.6 Nm
Displacement855 ci | 14.0 L

Case IH 9270 Horsepower Specs

Engine horsepower 335 hp | 249.8 kW
PTO horsepower claimed 308 hp | 229.7 kW
PTO horsepower tested 317.50 hp | 236.8 kW
Drawbar horsepower tested 264.77 hp | 197.4 kW

Case IH 9270 Useful Horsepower Calculations

PTO-to-engine power transfer 91.9% of engine hp reaches the PTO
Drawbar-to-engine power transfer 79% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 86% drawbar hp vs PTO hp
Engine size per PTO horsepower 2.8 ci per PTO hp
PTO horsepower per liter 22 PTO hp per L
Engine size per engine horsepower 2.6 ci per engine hp
Engine horsepower per liter 23.9 engine hp per L
Torque per PTO horsepower 3.7 lb-ft per PTO hp
Fuel tank per PTO horsepower 0.8 gal per PTO hp

Case IH 9270 Engine Specs

Engine type turbocharged aftercooled diesel
Displacement 855 ci | 14.0 L
Bore and stroke 5.50×6.00 inches | 140 x 152 mm
Compression 14.5:1
Rated RPM 2100
Torque 1131 lb-ft | 1533.6 Nm
Torque RPM 1400

Case IH 9270 Fuel, Cooling, Starting & Service Specs

Fuel capacity 250 gal | 946.2 L
Starter volts 12
Battery volts 12

Case IH 9270 Horsepower Comparison Charts

Engine horsepower comparison

This model

335 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

308 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

264.8 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

855 ci

Average

520 ci

Low

360 ci

High

750 ci

Torque comparison

This model

1,131 lb-ft

Average

700 lb-ft

Low

350 lb-ft

High

1,250 lb-ft

Rated RPM comparison

This model

2,100 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

2.8 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH 9270 Horsepower FAQ

How much horsepower does the Case IH 9270 have?

The listed engine output is 335 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 335 hp.

How much PTO horsepower does the Case IH 9270 have?

The listed PTO output is 308 hp, above the 175 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 308 hp.

How much drawbar horsepower does the Case IH 9270 have?

The listed drawbar output is 264.8 hp, above the 150 hp benchmark average. That makes the 264.8 hp drawbar number more useful than engine hp for tillage and heavy pulling.

How much engine power reaches the PTO on the Case IH 9270?

The PTO-to-engine transfer works out to 91.9%, from 335 engine hp to 308 PTO hp. That is a strong transfer figure when the two specs are from the same configuration.

How efficient is the Case IH 9270 for pulling work?

The drawbar-to-engine transfer is about 79%, from 335 engine hp to 264.8 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the Case IH 9270 better judged by PTO hp or drawbar hp?

The drawbar output is about 86% of PTO output, comparing 264.8 drawbar hp with 308 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the Case IH 9270 engine?

The engine displacement is 855 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.

Is the Case IH 9270 engine stressed for its PTO horsepower?

The engine has about 2.8 cubic inches per PTO hp, using 855 ci and 308 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the Case IH 9270 make?

The output density is about 22 PTO hp per liter, using 308 PTO hp and 14 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.