The Case IH Farmall 45A dimensions found are: length is 131.1 inches | 332 cm, width is 66.1 inches | 167 cm, and height is 93.9 inches | 238 cm.
Length131.1 inches | 332 cm
Width66.1 inches | 167 cm
Height93.9 inches | 238 cm
Case IH Farmall 45A Dimensions
Overall length
2WD: 131.1 inches | 332 cm | 4WD: 133.5 inches | 339 cm
Overall width
66.1 inches | 167 cm
Overall height
93.9 inches | 238 cm
Case IH Farmall 45A Weight
Shipping weight
3,527 lbs | 1599 kg | 3,836 lbs | 1740 kg
Case IH Farmall 45A Dimension Comparison Charts
Length comparison
This model
131.1 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
66.1 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
93.9 in
Average
100 in
Low
86 in
High
120 in
Weight comparison
This model
3,527 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
60 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 45A Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 45A is about 131.1 inches | 332 cm long, about 66.1 inches | 167 cm wide, and about 93.9 inches | 238 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 45A Dimensions FAQ
Is the Case IH Farmall 45A a long tractor?
The Case IH Farmall 45A has an average listed length at 131.1 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 45A narrow enough for tight storage?
The listed width is middle-of-the-pack at 66.1 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH Farmall 45A tall for a shed or garage?
The listed height is about normal at 93.9 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH Farmall 45A need?
The bare footprint is about 60 sq ft from a 10.9 ft length and 5.5 ft width. That is below the 75 sq ft benchmark for this category.
Is the Case IH Farmall 45A heavy for its size?
The listed weight is light for the category at 3,527 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the Case IH Farmall 45A fit easily in storage?
The fit numbers are fairly normal for the category: length 131.1 in, width 66.1 in and height 93.9 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
