The Case IH DX45 dimensions found are: length is 116.3 inches | 295 cm, width is 61.3 inches | 155 cm, height is 94.5 inches | 240 cm, and wheelbase is 73.5 inches | 186 cm.
Length116.3 inches | 295 cm
Width61.3 inches | 155 cm
Height94.5 inches | 240 cm
Wheelbase73.5 inches | 186 cm
Case IH DX45 Dimensions
Overall length
116.3 inches | 295 cm
Overall width
61.3 inches | 155 cm
Overall height
ROPS: 94.5 inches | 240 cm | Cab: 90.1 inches | 228 cm
Wheelbase
73.5 inches | 186 cm
Ground clearance
Frame: 13 inches | 33 cm
Front tread
46.4 inches | 117 cm
Rear tread
47.1 to 67.4 inches | 119 to 171 cm
Case IH DX45 Weight
Shipping weight
3417 lbs | 1549 kg | 4115 lbs | 1866 kg
Case IH DX45 Tire Size Notes
Ag front
7.00-16
Ag rear
13.6×24
Lawn/turf front
25×8.50-14
Lawn/turf rear
44-18-20
Industrial front
10×16.5
Industrial rear
17.5Lx24
Case IH DX45 Dimension Comparison Charts
Length comparison
This model
116.3 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
61.3 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
94.5 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
73.5 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
13 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
3,417 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
50 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH DX45 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH DX45 is about 116.3 inches | 295 cm long, about 61.3 inches | 155 cm wide, and about 94.5 inches | 240 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH DX45 Dimensions FAQ
Is the Case IH DX45 a long tractor?
The Case IH DX45 is on the shorter side at 116.3 in, which is below the 145 in benchmark average. That makes its listed length easier to fit than many tractors in the same utility tractor range.
Is the Case IH DX45 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 61.3 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH DX45 tall for a shed or garage?
The listed height is about normal at 94.5 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH DX45 need?
The bare footprint is about 50 sq ft from a 9.7 ft length and 5.1 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH DX45 have a short or long wheelbase?
The wheelbase is short for the category at 73.5 in, which is below the 86 in benchmark average. That points to a more compact chassis length.
Does the Case IH DX45 have good ground clearance?
The listed ground clearance is low for the category at 13 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Is the Case IH DX45 heavy for its size?
The listed weight is light for the category at 3,417 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
