The Case IH 9240 dimensions found are: length is 250.3 inches | 635 cm, width is 93.5 inches (minimum) | 237 cm, height is 143.0 inches | 363 cm, and wheelbase is 124 inches | 314 cm.
Length250.3 inches | 635 cm
Width93.5 inches (minimum) | 237 cm
Height143.0 inches | 363 cm
Wheelbase124 inches | 314 cm
Case IH 9240 Dimensions
Overall length
250.3 inches | 635 cm
Overall width
93.5 inches (minimum) | 237 cm
Overall height
Exhaust: 143.0 inches | 363 cm
Wheelbase
124 inches | 314 cm
Case IH 9240 Weight
Operating weight
28214 lbs (20.8R38 duals) | 12797 kg
Case IH 9240 Tire Size Notes
Ag front
18.4-38
Ag rear
18.4-38
Case IH 9240 Dimension Comparison Charts
Length comparison
This model
250.3 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
93.5 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
143 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
124 in
Average
115 in
Low
95 in
High
145 in
Weight comparison
This model
28,214 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
163 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 9240 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 9240 is about 250.3 inches | 635 cm long, about 93.5 inches (minimum) | 237 cm wide, and about 143.0 inches | 363 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 9240 Dimensions FAQ
Is the Case IH 9240 a long tractor?
The Case IH 9240 is a longer tractor at 250.3 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.
Is the Case IH 9240 narrow enough for tight storage?
The listed width is middle-of-the-pack at 93.5 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 9240 tall for a shed or garage?
The listed height is high for the category at 143 in, which is above the 125 in benchmark average. Do not rely on a rough garage-door guess; measure the actual tractor setup.
How much floor space does the Case IH 9240 need?
The bare footprint is about 163 sq ft from a 20.9 ft length and 7.8 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.
Does the Case IH 9240 have a short or long wheelbase?
The wheelbase is average for the category at 124 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Is the Case IH 9240 heavy for its size?
The listed weight is heavy for the category at 28,214 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Will the Case IH 9240 fit easily in storage?
Be careful. Based on length 250.3 in, width 93.5 in and height 143 in, at least one main dimension is above the category benchmark, so use the actual measured setup before planning clearance.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
