The Case IH 7220 dimension specs found are: wheelbase is 118.3 inches | 300 cm.
Wheelbase118.3 inches | 300 cm
Case IH 7220 Dimensions
Wheelbase
118.3 inches | 300 cm
Ground clearance
2WD front axle: 22.4 inches | 56 cm | 4WD front axle: 16.6 inches | 42 cm
Front tread
2WD: 60 to 88 inches | 152 to 223 cm | 4WD: 60 to 95 inches | 152 to 241 cm
Case IH 7220 Weight
2WD Shipping weight
15630 lbs | 7089 kg
4WD Shipping weight
16575 lbs | 7518 kg
Operating weight
17,418 lbs | 7900 kg
Case IH 7220 Tire Size Notes
Ag front
11.00-16
Ag rear
18.4R-38
Case IH 7220 Dimension Comparison Charts
Wheelbase comparison
This model
118.3 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
22.4 in
Average
18 in
Low
12 in
High
26 in
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 7220 Dimensions FAQ
Does the Case IH 7220 have a short or long wheelbase?
The wheelbase is average for the category at 118.3 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 7220 have good ground clearance?
The listed ground clearance is high for the category at 22.4 in, which is above the 18 in benchmark average. It has more underside clearance than the benchmark average.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
