The Case IH 856 XL dimensions found are: length is 144.9 inches | 368 cm, height is 104.9 inches | 266 cm, and wheelbase is 93.9 inches | 238 cm.
Length144.9 inches | 368 cm
Height104.9 inches | 266 cm
Wheelbase93.9 inches | 238 cm
Case IH 856 XL Dimensions
Overall length
2WD: 144.9 inches | 368 cm | 4WD: 150.4 inches | 382 cm
Overall height
2WD cab: 104.9 inches | 266 cm | 4WD cab: 105.9 inches | 268 cm
Wheelbase
2WD: 93.9 inches | 238 cm | 4WD: 92.4 inches | 234 cm
Ground clearance
2WD front axle: 20.5 inches | 52 cm | 4WD front axle: 15.9 inches | 40 cm
Front tread
2WD: 53 to 72 inches | 134 to 182 cm | 4WD: 65 to 71 inches | 165 to 180 cm
Rear tread
62 to 78 inches | 157 to 198 cm
Case IH 856 XL Weight
2WD Weight
8465 lbs | 3839 kg
4WD Weight
9082 lbs | 4119 kg
Case IH 856 XL Dimension Comparison Charts
Length comparison
This model
144.9 in
Average
145 in
Low
120 in
High
175 in
Height comparison
This model
104.9 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
93.9 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
20.5 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
8,465 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 856 XL Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 856 XL is about 144.9 inches | 368 cm long and about 104.9 inches | 266 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 856 XL Dimensions FAQ
Is the Case IH 856 XL a long tractor?
The Case IH 856 XL has an average listed length at 144.9 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 856 XL tall for a shed or garage?
The listed height is about normal at 104.9 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
Does the Case IH 856 XL have a short or long wheelbase?
The wheelbase is average for the category at 93.9 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 856 XL have good ground clearance?
The listed ground clearance is high for the category at 20.5 in, which is above the 15 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 856 XL heavy for its size?
The listed weight is heavy for the category at 8,465 lbs, which is above the 5,500 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
