The Massey Ferguson 1E.25 tractor battery spec found is 12 V with 500 CCA.
Voltage12 V
Cold cranking amps500 CCA
Massey Ferguson 1E.25 Battery Size Details
Replacement battery recommendation
12 V, 500 CCA
Battery voltage
12 V
Battery CCA
500 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
500 CCA
Average
600 CCA
Low
400 CCA
High
800 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the compact tractor category. Use the exact battery label and manual before buying.
Massey Ferguson 1E.25 Extra Battery Notes
Replacement note
For the Massey Ferguson 1E.25, match the replacement battery to the captured spec: 12 V, 500 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The Massey Ferguson 1E Series compact tractors have the battery located at ground level in front of the radiator for easy access
Battery replacement steps
To replace the battery on a Massey Ferguson 1E.25 tractor, first disconnect the negative terminal, then the positive terminal. Next, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal
Bad battery symptoms
The most common bad battery symptoms for Massey Ferguson tractors include a dead or weak battery, a starter motor that clicks but doesn’t turn the engine, and difficulty starting the engine, especially in cold weather or after long periods of inactivity
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official masseyferguson.com website before ordering a replacement battery.
