New Holland TC29DA Battery Size + Replacement Guide

Quick answer:

The New Holland TC29DA tractor battery spec found is 12 V, Group 24F, with 450 CCA.

Voltage12 V
Group size24F
Cold cranking amps450 CCA

New Holland TC29DA Battery Size Details

Replacement battery recommendation New Holland recommends genuine batteries for the TC29DA to ensure compatibility and performance, and Cold Cranking Amps (CCA) should match or exceed the original specification for reliable starting in cold weather – 12 V, Group 24F, 450 CCA
Battery voltage 12 V
Battery group size 24F
Battery CCA 450 CCA

Battery CCA Comparison Chart

Battery CCA comparison

This model

450 CCA

Average

300 CCA

Low

230 CCA

High

500 CCA

Benchmarks use practical low, average and high cold-cranking-amp ranges for the lawn/garden tractor category. Use the exact battery label and manual before buying.

New Holland TC29DA Extra Battery Notes

Replacement note For the New Holland TC29DA, match the replacement battery to the captured spec: 12 V, Group 24F, 450 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location The battery on the New Holland TC29DA tractor is located on the left side of the tractor, typically near the engine compartment. It is a 12-volt battery
Battery replacement steps To replace the battery on a New Holland TC29 tractor, first ensure the ignition is off and the parking brake is engaged. Then, disconnect the negative (-) battery cable, followed by the positive (+) cable, remove any hold-down clamps, lift out the old battery, clean the tray and terminals, and finally install the new battery by connecting the positive cable first, then the negative cable. Always follow safety precautions when handling batteries
Bad battery symptoms Common symptoms of a bad battery in a New Holland TC29DA tractor include a clicking sound when turning the key, dim dashboard lights, and no response from the engine. Regularly checking the battery voltage and ensuring clean, tight connections can help prevent these issues
Safe removal note Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note

Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official newholland.com website before ordering a replacement battery.