The Kubota ZG127S mower blade part number found is K5575-34330. The blade measurement captured is thickness 0.5 in (13 mm).
Blade part #K5575-34330
Blade sizethickness 0.5 in (13 mm)
Kubota ZG127S Mower Blade Size and Part Numbers
Mower blade part number
K5575-34330
Blade thickness
0.5 in (13 mm)
Blade type
mulching, standard, and Gator
Blade Size Comparison Chart
Blade thickness comparison
This model
0.5 in
Average
0.25 in
Low
0.188 in
High
0.312 in
Kubota ZG127S Blade Notes
Blade note
The Kubota ZG127S blade listing captured here shows single blade part number K5575-34330 and thickness 0.5 in (13 mm). Do not buy purely from model name if the mower deck or serial range is different
Blade type note
For the Kubota ZG127S, blade type is listed as mulching, standard, and Gator. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
For the Kubota ZG127S, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
Kubota ZG127S Mower Blade FAQ
Which blade type should you use on the Kubota ZG127S?
The blade type captured is mulching, standard, and Gator. Use that against the captured fitment value K5575-34330. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured Kubota ZG127S blade part number enough to buy from?
The captured blade part number is K5575-34330. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
