The Kubota Z781T mower blade part number found is 77700-05581. The blade measurement captured is thickness 0.5 in (13 mm). The deck uses 3 blades.
Kubota Z781T Mower Blade Size and Part Numbers
| Mower blade part number | 77700-05581 |
|---|---|
| Blade thickness | 0.5 in (13 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift and mulching |
Blade Size Comparison Chart
Blade thickness comparison
Kubota Z781T Blade Notes
| Blade note | The Kubota Z781T blade listing captured here shows single blade part number 77700-05581 and thickness 0.5 in (13 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Kubota Z781T, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Kubota Z781T is high-lift and mulching. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the Kubota Z781T, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
Kubota Z781T Mower Blade FAQ
Which blade type should you use on the Kubota Z781T?
The blade type captured is high-lift and mulching. Use that against the captured fitment value 77700-05581. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured Kubota Z781T blade part number enough to buy from?
The captured blade part number is 77700-05581. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.

