The Cub Cadet 1250 mower blade part number found is 742-04125. The blade set part number found is 942-05052A. The deck uses 3 blades. The captured deck size is 38 in deck.
Blade part #742-04125
Blade set part #942-05052A
Blade count3 blades
Deck size38 in deck
Cub Cadet 1250 Mower Blade Size and Part Numbers
Mower blade part number
742-04125
Mower blade set part number
942-05052A
Number of blades
3 blades
Deck size
38 in deck
Blade type
high-lift, mulching, standard, and 3-in-1
Blade Size Comparison Chart
Mower deck size comparison
This model
38 in
Average
38 in
Low
30 in
High
48 in
Cub Cadet 1250 Blade Notes
Blade note
The Cub Cadet 1250 blade listing captured here shows single blade part number 742-04125 and blade set part number 942-05052A. Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money
Deck note
For the Cub Cadet 1250, the captured deck information is deck size 38 in deck and blade count 3 blades. Match the blades to the fitted deck, not just the tractor model name
Blade type note
The Cub Cadet 1250 blade style captured here is high-lift, mulching, standard, and 3-in-1. Blade type affects airflow and clipping handling, not just cut width
Fitment note
Before ordering Cub Cadet 1250 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
Cub Cadet 1250 Mower Blade FAQ
Should you buy one Cub Cadet 1250 blade or a full set?
The single blade number captured is 742-04125, and the set number captured is 942-05052A. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Why does the Cub Cadet 1250 deck size matter before buying blades?
The captured deck setup is 38 in deck with 3 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Can you swap Cub Cadet 1250 blade types?
The blade type captured is high-lift, mulching, standard, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use 38 in deck as the fitment starting point
Is the captured Cub Cadet 1250 blade part number enough to buy from?
The captured blade part number is 742-04125. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official cubcadet.com before ordering replacement blades.
